Three-NVMe-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with three NVMe
backplanes.
Notes:
• See
"Connecting cables to the processor and memory expansion tray" on page 50
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
• See
"Connecting cables to the NVMe switch cards" on page 52
connecting PCIe cables to the PCIe switch cards.
See the following sections for cable routing combinations with three AnyBay drive backplanes.
•
"Three backplanes" on page 74
•
"Four backplanes" on page 75
•
"Five backplanes" on page 76
•
"Six backplanes" on page 77
to perform the
to perform the procedure properly while
.
Chapter 3
Internal cable routing
73