Table of Contents
Advertisement
Step 1.
Make preparations for this task.
a.
Remove the top cover (see
b.
Remove both PCIe riser cages or fillers, the chassis air baffle, and the PCIe expansion tray (see
"Remove a 4U PCIe riser cage" on page
"Remove the 4U PCIe expansion tray" on page
c.
Disconnect all the cables (including external ones) from the adapter.
Step 2.
Open the retaining latch.
Step 3.
Remove the screw that secures the adapter.
Step 4.
Grasp the adapter by upper corners, and remove it from the system board.
Figure 78. Removing an adapter from the system board
Remove an adapter from the PCIe riser card assembly
Procedure
Step 1.
Make preparations for this task.
a.
Remove the top cover (see
b.
Remove both PCIe riser cages or fillers, the chassis air baffle, and the PCIe expansion tray (see
"Remove a 4U PCIe riser cage" on page
"Remove the 4U PCIe expansion tray" on page
c.
Disconnect all the cables (including external ones) from the adapters that are installed in the
PCIe riser card assembly.
d.
Remove the PCIe riser assembly (see
"Remove the top cover" on page
255,
"Remove the chassis air baffle" on page
249).
"Remove the top cover" on page
255,
"Remove the chassis air baffle" on page
249).
"Remove the PCIe riser assembly" on page
Chapter 4
240).
240).
186).
.
Hardware replacement procedures
270, and
270, and
189
Advertisement
Table of Contents
