Three-NVMe-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with three NVMe
backplanes.
Notes:
• See "Connecting cables to the processor and memory expansion tray" on page 46 to perform the
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
• See "Connecting cables to the NVMe switch cards" on page 48 to perform the procedure properly while
connecting PCIe cables to the PCIe switch cards.
See the following sections for cable routing combinations with three AnyBay drive backplanes.
• "Three backplanes" on page 70
• "Four backplanes" on page 72
• "Five backplanes" on page 73
• "Six backplanes" on page 74
.
Chapter 3
Internal cable routing
69