Table of Contents
Advertisement
Chapter 5. Problem determination
Use the information in this section to isolate and resolve issues that you might encounter while using your
server.
Lenovo servers can be configured to automatically notify Lenovo Support if certain events are generated.
You can configure automatic notification, also known as Call Home, from management applications, such as
the Lenovo XClarity Administrator. If you configure automatic problem notification, Lenovo Support is
automatically alerted whenever a server encounters a potentially significant event.
To isolate a problem, you should typically begin with the event log of the application that is managing the
server:
• If you are managing the server from the Lenovo XClarity Administrator, begin with the Lenovo XClarity
Administrator event log.
• If you are using some other management application, begin with the Lenovo XClarity Controller event log.
Event logs
An alert is a message or other indication that signals an event or an impending event. Alerts are generated by
the Lenovo XClarity Controller or by UEFI in the servers. These alerts are stored in the Lenovo XClarity
Controller Event Log. If the server is managed by the Chassis Management Module 2 or by the Lenovo
XClarity Administrator, alerts are automatically forwarded to those management applications.
Note: For a listing of events, including user actions that might need to be performed to recover from an
event, see the Messages and Codes Reference, which is available at:
http://ralfss28.labs.lenovo.com:8787/
help/topic/royce/pdf_files.html
Lenovo XClarity Administrator event log
If you are using Lenovo XClarity Administrator to manage server, network, and storage hardware, you can
view the events from all managed devices through the XClarity Administrator.
© Copyright Lenovo 2020, 2022
285
Advertisement
Table of Contents
