Sio Configuration - Aaeon MIX-ALND1 Manual

Critical temperature [60]
Input value range: [0~255]
Critical tolerance [0]
Input value range: [0~7]
Enable critical duty [Disabled]
Configuration options: [Disabled] [Enabled]
Tolerance value [0]
Input value range: [0~7]
RPM Mode [Disabled]
Allows you to enable or disable Smart Fan IV Close Loop Fan Control RPM
Mode.
Configuration options: [Disabled] [Enabled]
3.3.7 SIO Configuration
The items in this menu allow you to configure Super IO settings.
[*Active*] Serial Port 1
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
NOTE: The following two items appear only when you set Use this device to
[Enabled].
Possible [Use Automatic Settings]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=3F8h; IRQ=4;] [IO=2F8h; IRQ=3]
Mode [RS232]
Allows you to select the Serial Port mode. Configuration options: [RS232]
[RS422] [RS485]
[*Active*] Serial Port 2
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
3-8
MIX-ALND1