Table of Contents
Advertisement
2.7
Connectors
2.7.1
Rear panel connectors
1
2
1.
DC Power connector. Insert the power adapter into this port.
NOTES:
•
It only supports 12V DC input.
•
The power adapter is purchased separately.
2.
DisplayPort. This port is for a DisplayPort-compatible device.
3.
HDMI™ ports. These ports are for a High-Definition Multimedia Interface
(HDMI™) connectors, and are HDCP compliant allowing playback of HD
DVD, Blu-ray, and other protected content.
4.
LAN (RJ-45) ports. These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN
port LED indications.
LAN port LED indications
ACT/LINK LED
Status
OFF
YELLOW
BLINKING
YELLOW
(Blinking then
steady)
5.
USB 3.2 Gen 2 ports (Type-A). These 9-pin Universal Serial Bus (USB)
ports connect to USB 3.2 Gen 2 devices.
IMPORTANT: We strongly recommend that you connect your devices to ports
with matching data transfer rate. For example connecting your USB 3.2 Gen
2 devices to USB 3.2 Gen 2 ports for faster and better performance for your
devices.
6.
USB 2.0 ports. These Universal Serial Bus (USB) ports are for USB 2.0
devices.
7.
Line Out port (lime). This port connects to a headphone or a speaker. In a
4.1-channel and 5.1-channel configurations, the function of this port becomes
Front Speaker Out.
Chapter 2: Motherboard information
3
SPEED LED
Description Status
No link
OFF
Linked
ORANGE 100 Mbps
Data activity GREEN
Ready to
wake up
from S5
mode
4
5
Description
10 Mbps connection
connection
1 Gbps connection
6
7
ACT/LINK
SPEED
LED
LED
LAN port
2-13
Advertisement
Table of Contents
