Usb Configuration; Hardware Monitor - Aaeon MIX-ALND1 Manual

3.3.5 USB Configuration
NOTE: The USB Devices item lists auto-detected values. If no USB device is
detected, the item shows None.
USB Mass Storage Driver Support [Enabled]
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
3.3.6

Hardware Monitor

The items in this menu allow you to configure the smart fan.
Smart Fan Function
System Smart Fan and CPU Smart Fan Setting
Fan Mode [Smart Fan IV]
Allows you to select the FAN mode. Configuration options: [Manual Mode]
[Thermal Cruise] [Smart Fan IV] [Speed Cruise]
NOTE: The following item appears only when you set Fan Mode to [Manual
Mode].
Manual PWM [128]
Allows you to set the Manual PWM value.
NOTE:
~100%)
NOTE: The following items appear only when you set Fan Control Mode to
[Thermal Cruise Mode].
Critical temperature [60]
Input value range: [0~255]
Enable critical duty [Disabled]
Configuration options: [Disabled] [Enabled]
Critical duty value [10]
Input value range: [0~127]
Fan target temperature [40]
Input value range: [0~127]
3-6
The fan will work with this Manual PWM Value (0~255 for 10%
.
MIX-ALND1