Sio Configuration - Aaeon MIX-H310D1 Manual

3.3.6 SIO Configuration
The items in this menu allow you to configure Super IO settings.
[*Active*] Serial Port 1
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
The following two items appear only when you set Use this device to
[Enabled].
Possible [Use Automatic Settings]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=3F8h; IRQ=4;] [IO=3E8h; IRQ=7]
Mode [RS-232]
Allows you to select the Serial Port mode. Configuration options: [RS-232]
[RS-422] [RS-485]
3-8
This item allows you to set the temperature for CPU Fan when
CPU temperature is out of the target temperature. Configuration
fields: [Down to 0] [To Fan out stop Vaule]
Fan Out Stop Value [xx]
The Fan out value decreases to this value if the temperature stays
below the lowest temperature limit.
Fan Out Stop Time [xx]
Determines the amount of time it takes Fan out value to fall from
the stop value to zero. The values range from 0~255.
Critical Temperature [xx]
Determines the time that Fan Out takes to decrease its value by
one step. The values range from 0~255.
Fan Out Step Up Time [xx]
Determines the time that Fan Out takes to increase its value by
one step. The values range from 0~255.
Fan Out Step Down Time [xx]
Determines the time that Fan Out takes to decrease its value by
one step. The units are intervals of 0.1 second. The values range
from 0~255.
MIX-H310D1