Ptt Configuration; Sata Configuration - Aaeon MIX-ALND1 Manual

3.3.3 PTT Configuration
This item allows you to set the PTT configuration.
TPM Device Selection [dTPM]
Allows you to select TPM device.
[PTT]
[dTPM]
NOTE: When PTT is disabled, all data saved on it will be lost.
3.3.4 SATA Configuration
The BIOS automatically detects the presence of SATA devices. The Serial ATA
Ports listed will display Empty if there are no Serial devices connected to the ports.
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices.
Configuration options: [Enabled] [Disabled].
NOTE: The following items appear only when you set SATA Controller(s) to
[Enabled].
SATA6G_ 1
Port 0 [Enabled]
Allows you to enable / disable the SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug [Disabled]
Allows you to enable / disable the SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
M.2 SATA Port
Port 1 [Enabled]
Allows you to enable / disable the SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug [Disabled]
Allows you to enable / disable the SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS setup
Enables PTT in SkuMgr.
Disables PTT in SkuMgr.
3-5