Table of Contents
Advertisement
The following items appear only when you set Chassis Fan1 Mode to [Manual
Duty Mode].
Manual Duty Mode [xx]
Specify fixed Duty-Cycle. Input value range: [1~100]
3.3.5
Trusted Computing
Security Device Support [Enable]
Allows you to enable or disable BIOS support for security devices. Configuration
options: [Disable] [Enable]
TPM State [Enabled]
This item appears only when you set the TPM Support item to [Enabled] and
allows you to enable or disable the TPM after POST. Reboot your system for the
changes to take effect. Configuration options: [Disabled] [Enabled]
Pending operation [None]
Allows you to schedule an operation for security devices. Reboot your system for
the changes to take effect. Configuration options: [None] [TPM Clear]
Device Select [Auto]
Allows you to schedule an operation for security devices. Reboot your system for
the changes to take effect. Configuration options: [Auto] [TPM 1.2] [TPM 2.0]
[Auto]
[TPM 1.2]
[TPM 2.0]
3.3.6
SIO Configuration
Serial Port 1
The sub-items in this menu allow you to set the serial port configuration.
Use This Device [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Enabled] [Disabled]
Possible [Use Automatic Settings]
Allows you to select the Serial Port base address. Configuration options: [Use
Automatic Settings] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3;]
Mode [RS232]
Allows you to select COM RS Mode. Configuration options: [RS232] [RS422]
[RS485]
3-4
Select this item to support both TPM 1.2 and TPM 2.0 devices
with default support of TPM 2.0 devices. If TPM 2.0 devices
are not found, TPM 1.2 devices will be enumerated.
Select this item to support TPM 1.2 devices only.
Select this item to support TPM 2.0 devices only.
EMB-BSW1
Advertisement
Table of Contents
