Aaeon MIX-ALND1 Manual page 27

9. USB 2.0 headers (10-pin USB12, USB34)
These headers are for USB 2.0 ports. Connect the USB cable to any of
these headers. These USB headers comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
CAUTION! Never connect a 1394 cable to the USB connector. Doing so will
damage the motherboard.
NOTE: The USB cable is purchased separately.
10. Debug Card connector (DEBUG)
This connector allows connection to a Debug card.
Chapter 2: Motherboard information
USB2_34
A
PIN 10
+5V
A
USB_PN4
USB_PP4
GND
GND
B
PIN 2
USB2_12
B
PIN 10
+5V
USB_PN2
USB_PP2
GND
GND
PIN 2
DEBUG
ESPI_IO0
ESPI_IO1
ESPI_IO2
ESPI_IO3
+3V
ESPI_CS0#
ESPI_RESET#
GND
ESPI_CLK
+3VSB_ATX
GND
(NC)
PIN 9
GND
GND
USB_PP3
USB_PN3
+5V
PIN 1
PIN 9
GND
GND
USB_PP1
USB_PN1
+5V
PIN 1
2-19