Internal Connectors - Aaeon MIX-ALND1 Manual

2.7.2

Internal connectors

1. ATX Power connector (4-pin EATX_PWR)
This connector is for an ATX power supply plug. The power supply plug
is designed to fit the connectors in only one orientation. Find the proper
orientation and push down firmly until the connector completely fits.
IMPORTANT:
•
•
CAUTION! DO NOT connect the ATX Power connector and the 12V DC jack to
a power source simultaneously.
2-14
For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 60W.
We recommend that you use a PSU with higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
EATX_PWR
PIN 1
MIX-ALND1