Table of Contents
Advertisement
7.
Serial ATA 6.0Gb/s port (7-pin SATA6G_0)
This port connects to a Serial ATA 6.0 Gb/s hard disk drive via a Serial ATA
6.0 Gb/s signal cable.
IMPORTANT: When using hot-plug and NCQ, set the SATA VMD controller
item in the BIOS to [Disabled]. See section 3.3.4 SATA Configuration for
details.
8.
Front Panel Audio header (10-1 pin AAFP)
This header is for a chassis-mounted front panel audio I/O module that
supports HD audio standard. Connect one end of the front panel audio I/O
module cable to this header.
IMPORTANT: We recommend that you connect a high-definition front panel
audio module to this header to avail of the motherboard's high-definition audio
capability.
2-18
SATA6G_0
PIN 2
PIN 10
AAFP
PIN 1
PIN 9
MIX-ALND1
Advertisement
Table of Contents
