Table of Contents
Advertisement
3.3.3
SATA Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the working mode of the SATA controller. Configuration options:
[AHCI] [RAID]
Port 0, Port 2 [Enabled]
These items allow you to enable/disable the SATA port(s). Configuration options:
[Disabled] [Enabled]
Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration
options: [Disabled] [Enabled]
3.3.4
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
3.3.5
Hardware Monitor
The items in this menu allow you to configure the smart fan.
Smart Fan Configuration
CPU Smart Fan Control / CHA_FAN1 Smart Fan Control [Enabled]
Allows you to enable or disable CPU_FAN1/CHA_FAN1 Smart Fan Control.
Configuration options: [Enabled] [Disabled]
The following sub-items appear only when you set CPU Smart Fan Control or
CHA_FAN1 Smart Fan Control to [Enabled].
Fan Control Mode [Smart Fan IV Mode]
Configuration options: [Manual Mode] [Thermal Cruise Mode] [Smart Fan IV
Mode]
3-4
Enables the support for USB devices on legacy operating
systems (OS).
USB devices are only available when running BIOS Setup.
Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
MIX-H310D2
Advertisement
Table of Contents
