Table of Contents
Advertisement
TPM2.0 UEFI Spec Version [TCG_2]
Allows you to select the TCG2 spec version support.
[TCG_1_2]
[TCG_2]
Physical Presence Spec Version [1.3]
Allows you to select which TCG Physical Presence Interface Specification Version
is supported by the OS. Configuration options: [1.2] [1.3]
PH Randomization [Disabled]
Allows you to enable or disable the Platform Hierarchy Randomization.
Configuration options: [Disabled] [Enabled]
Device Select [Auto]
Allows you to schedule an operation for security devices. Reboot your system for
the changes to take effect. Configuration options: [Auto] [TPM 1.2] [TPM 2.0]
[Auto]
3.3.3
SATA Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable SATA devices. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the working mode of the SATA controller. Configuration options:
[AHCI] [RAID]
Port 0, Port 2 [Enabled]
These items allow you to enable or disable the SATA port(s). Configuration
options: [Disabled] [Enabled]
Hot Plug [Disabled]
These items allow you to enable or disable SATA Hot Plug support. Configuration
options: [Disabled] [Enabled]
3.3.4
USB Configuration
The USB Devices item lists auto-detected values. If no USB device is detected,
the item shows None.
3-4
Compatible mode for Windows
Newer TCG2 protocol and event format for Windows
later.
Select this item to support both TPM 1.2 and TPM 2.0 devices
with default support of TPM 2.0 devices. If TPM 2.0 devices
are not found, TPM 1.2 devices will be enumerated.
8 / Windows
10.
®
®
10 or
®
MIX-H310A2
Advertisement
Table of Contents
