Registration - VTech 16650 User Manual

REGISTRATION

Your handset and base station are pre-registered. Up to ive handsets can be
registered to a single base station.
If for some reason, the handset is not registered to the base station (
even when the handset is near the base station), register your handset according
to the following procedure.
On the cordless handset:
1. Press MENU/OK and
If you have more than one base, press MENU/OK and
2.
number from BASE 1, BASE 2, BASE 3 and BASE 4. There will be a
current registered base number.
Press MENU/OK to display "PIN?", enter the 4-digit system PIN for the base
3.
(default PIN is 0000).
4. Press MENU/OK and the display will show "WAITING".
At the same time, press MENU/OK and
5.
REGISTRATION.
Press MENU/OK to see "PLEASE WAIT" lashing on the base display. After
6.
a short delay, if the registration is successful, there will be a conirmation
beep, and the handset display will go back to idle mode with the new handset
number shown. The base display will also go back to idle mode.
7. Press INT/MUTE/CLEAR at any time to cancel.
/ to select REGISTRATION.
51
/
/
on the base to select
lashes
to select the base
behind the