Table of Contents
Advertisement
Inspection & Preparation
PRO+AQUA filtration systems are designed in California, USA and are made from high quality,
commercial grade filters and components.
IMPORTANT!
!
Before installing - Please read the entire manual and become familiar with instructions and parts
needed before proceeding with the installation.
Record the date of purchase in your manual for future reference:
Date of purchase:
System Inspection Before Starting: Please take the system and all the components out of the box. Inspect the system and all the connection
fittings carefully, making sure nothing was damaged during shipping. If any part is cracked or broken, please do not proceed with the installation
and contact PRO+AQUA or your distributor for support.
Required Components Not Included With The System: 80 lbs (2 bags) water softener salt pellets are needed to fill the brine tank. The softener
system will use any kind of salt formulated for water softener use, but it is advised to use the pellet-shaped salt as it tends to dissolve more evenly.
(Potassium can be used for a salt-free alternative.)
Components List:
Electronic Valve
w/ Hydraulic Meter
High Strength Bypass
Valve w/ 1" Yoke
4
AC Power Supply
1/2" Drain Line Hose
Upper Basket
O-Ring Lubricant
Have questions? Call 1-800-980-3335
3/8" Brine Line Hose
(12.12 ft)
Brine Tank w/ Brine Well & Float Valve
(Pre-assembled)
Riser Tube & Bottom
Distributor (Pre-installed)
(5 ft)
Resin Tank (Pre-filled)
Advertisement
Table of Contents
