Table of Contents
Advertisement
3
Setting the Brine Time
(Recommend keeping at factory default setting)
(bd) Brine Draw pulls the brine water from the brine tank and allows the resin to mix with the
brine water, regenerating the system. The more contact time the system is set the more time
it allows the resin to bond with the brine water.
The default setting is 60 minutes.
A: Press SETTINGS button to adjust
the brine draw time setting.
B: Press UP or DOWN buttons to
change brine time (minutes).
Range: 0 - 999
C: Press SETTINGS button to accept
and continue to the next digit.
Advanced Settings
www.proaquawater.com
11:30
SET-6 -bd-
FLASHING
11:30
060
-bd-
1
2
3
FLASHING
27
Advertisement
Table of Contents
