Table of Contents
Advertisement
3
Manual Regeneration
Queued Regeneration
When the valve is in service position press the CYCLE button to activate the queued regeneration. Queued
regeneration means the system will initiate a regeneration at the time set. If missed, it will initiate on the next day.
11:30
FLASHING
02:18 ----
The display shows the queued
Regeneration in Timer Mode.
The display shows the queued regeneration in Meter Delay Mode. The system will initiate a regeneration - either the
treated water remaining counts down to zero or the remaining time counts down to zero, whichever is first.
11:30
FLASHING
4
Immediate Regeneration
From the home screen, press and hold the CYCLE button for
5 seconds. An immediate regeneration will be initiated.
18 gAL
www.proaquawater.com
Features & Display
FLASHING
The display shows the queued
Regeneration in Meter Delay Mode.
ALTERNATING
DISPLAY
11:30
FLASHING
02:18 ----
Your screen will feature this display
as soon as the regeneration begins.
11:30
02:18 ----
11:30
gOtO
bW
31
Advertisement
Table of Contents
