Table of Contents
Advertisement
IMPORTANT!
!
You may hit the CYCLE button to exit to the main menu after setting up the gallons needed for regeneration. Settings
5 - 8 have been preset from the factory and are only meant for special applications that require customized settings.
Consult your PRO+AQUA Support Team for further guidance if needed. 800-980-3335.
(M) Meter or (tM) Time Meter Mode
Default: 2:00 a.m. – OFF
Hours override range: Every 24 hours (24, 48, 72... 960)
11:30
SEt- 4 t-h
FLASHING
A: Press the SETTINGS
button to adjust the time
and hour override setting.
11:30
02
h-0ff
C: Press the SETTINGS
button to go to hours
override.
FLASHING
www.proaquawater.com
Advanced Settings
11:30
02
h-0ff
FLASHING
B: Press UP or DOWN buttons to
adjust the regeneration time.
11:30
02
H-024
D: Press UP or DOWN buttons to
adjust hours override.
Press the SETTINGS button to
accept and continue.
FLASHING
25
Advertisement
Table of Contents
