Table of Contents
Advertisement
Features & Display
1
Display In Service
11:30
618
Time Meter Regeneration Mode
The display will show the current time and the remaining treated water alternatively. When the remaining treated water
counts down to zero the display changes to the countdown of time till regeneration starts.
11:30
02:18 01-d
REG. REMAINING TIME
Timed Regeneration Mode
The display will show the current time, remaining time
to the next set regeneration, and the days override.
2
Restore Factory Settings
A: Disconnect power to the control head.
B: Press and hold the CYCLE button and plug in the power.
C: Release the CYCLE button.
The system will go through the reset and restore to factory setting.
Note: The system may take a few moments before returning to the
normal screen.
30
gAL
REG. OVERRIDE DAYS
Have questions? Call 1-800-980-3335
11:30
02:18
REG. REMAINING TIME
11:30
618
REG. REMAINING CAPACITY
Meter Regeneration Mode
The display will show the current time and the
remaining treated water to the next regeneration.
11:30
rESEt
gAL
Advertisement
Table of Contents
