Table of Contents
Advertisement
4
Lubricate the rim of the riser tube
located on the opening of the tank.
6
Hand-tighten the valve then snug it further by
lightly tapping it with the palm of your hand.
DO NOT over-tighten or use tools to tighten
the valve or damage could occur.
LUBRICATION
AREA
www.proaquawater.com
Valve Installation
5
Place the upper basket on the
riser tube and push the valve
down to the tank and thread
the valve on the tank by
turning it clockwise.
UPPER
Be sure not to
BASKET
cross-thread the
valve on the tank.
The valve should
thread easily in the
tank. If not, it may
be cross-threaded.
RISER
TUBE
11
Advertisement
Table of Contents
