Table of Contents
Advertisement
Advanced Settings
2
Setting the Back Wash Time
(Recommend keeping at factory default setting)
(bW) Backwashing time allows the system to flush out any debris or particles that may enter
the resin tank. It also helps create space in between the resins to allow more contact surface
for the next stage of regeneration.
The default setting is 15 minutes.
A: Press SETTINGS button to adjust
the backwash setting.
B: Press UP or DOWN buttons to
change backwash time (minutes).
Range: 0 - 999
C: Press SETTINGS button to accept
and continue to the next digit.
26
Have questions? Call 1-800-980-3335
11:30
SEt- 5 -bW-
FLASHING
11:30
015
-bW-
1
2
3
FLASHING
Advertisement
Table of Contents
