Advanced Settings - PRO+AQUA PRO-S-80E Installation Manual

Advanced Settings

1
Regeneration Time And Hours Override
IMPORTANT!
!
Depending on the mode selected, the default setting may be set to regenerate at every 72 hours. Even if (M) Meter
or (tM) Time Meter mode is selected, the regeneration override will still allow the system to regenerate even if the
gallons didn't count down to zero. It is highly recommended to keep the setting at OFF if (M) Meter or (tM) Time
Meter mode was selected.
(t) Time Mode
Default: 2:00 a.m. – 072 hours.
Hours Override range: Every 24 hours (24, 48, 72... 960)
11:30
SEt- 4 t-h
FLASHING
A: Press the SETTINGS
button to adjust the time
and hour override setting.
13
D: Press UP or DOWN
buttons to adjust hours
override.
24
11:30
02
FLASHING
B: Press UP or DOWN
buttons to adjust the
regeneration time.
11:30
h-072
FLASHING
Have questions? Call 1-800-980-3335
h-072
FLASHING
C: Press the SETTINGS
button to go to hours
override.
11:30
13 h-060
E: Press the SETTINGS
button to accept and
continue.
11:30
13 h-072
FLASHING