Table of Contents
Advertisement
Valve Programing
Overview:
11:30
1000
WARNING!
!
DO NOT UNPLUG THE UNIT'S POWER SUPPLY
DURING REGENERATION!
Cancel Regeneration:
During regeneration, if there is a need to stop the
process, press the UP & DOWN buttons simultaneously
to stop regenerating. The display will return to the home
screen after a few moments.
NOTE:
*
Make sure the system is powered on before starting. Plug the power transformer into an approved power source.
Connect the power cord to the control valve head and before continuing ensure that 5 gallons of water and at least
80 lbs of salt (2 bags) have been added to the brine tank.
16
gAL
The display will show as:
Have questions? Call 1-800-980-3335
Display Overview
A. Flow Meter Indicator
B. Time of day
C. Status
D. Volume remaining
E. Regeneration Mode
Timer
Meter Immediate
Meter Delay
Setting Button
Up / Down Buttons
Cycle Button
11:30
goto
Sr
Advertisement
Table of Contents
