Table of Contents
Advertisement
5
Setting The Water Filling Time
(Recommend Keeping At Factory Default Setting)
(bF) Brine Fill time allows the system to fill the brine tank back up with the water for the next
regeneration. Depending on the water pressure of the source water and the time set for brine
fill, the amount of water inside the brine tank may vary.
The default setting is 12 minutes.
A: Press SETTINGS button to adjust
the brine water filling setting.
B: Press UP or DOWN buttons to
change water filling time (minutes).
Range: 0 - 999
C: Press SETTINGS button to accept
and continue to the next digit.
Advanced Settings
www.proaquawater.com
11:30
SEt- 8 -bf-
FLASHING
11:30
012
-bf-
1
2
3
FLASHING
29
Advertisement
Table of Contents
