1-3.6 Product Specific Safety; 1-3.7 Moving Axes - Electron E-ROBOT+3 Series User Manual

EN European Standarts
2014/34/EU
EN 12100-1 EN 12100-2
EN IEC 60079-0
EN ISO 80079-36
EN ISO 80079-37
EN 60529
EN 60204
1.3.6 Product Specific Safety
This product is a constituent part of the equipment and is therefore integrated in the system's safety con-
cept. If it is to be used in a manner outside the scope of the safety concept, then corresponding measures must be
taken. The installation work to be done by the customer must be carried out according to local regulations. It must be
ensured, that all components are earthed according to the local regulations before start-up.
1.3.7 Moving Axes
• Operator has to read the user manual before starting the moving axes.
• Reciprocator has to be controlled before start up.
• Safety regulations for the country have to be considered aswell.
• Electricity has to be cut off for maintenance and cleaning.
• Before start up, the connections between the gun (s) and control unit have to be checked.
• Spare parts have to be the approved SISTEM TEKNIK spare parts for the explosion protection.
• Dust and air mixture is flammable. It is forbidden to smoke where the reciprocator is working.
• As a general rule, the people who are using pacemaker is strictly forbidden to enter electrostaticly charged
areas for their own protection.
8
The approximation of the laws of the Member States relating
to apparatus and safety systems for their intended use in po-
tentially explosive atmospheres
Machine safety
Electrical equipment for locations where there is danger of
explosion
Non-electrical equipment for explosive atmospheres - Basic
method and requirements
Non-electrical equipment for explosive atmospheres -
Non-electrical type of protection constructional safety ''c'',
control of ignition sources ''b'', liquid immersion ''k''
IP-Type protection: contact, foreign bodies and water pro-
tection for electrical equipment
VDE regulations for the setting up of high voltage electrical
machine tools and processing machines with mains voltag-
es up to 1000 V
NOT:
For further information, see the more detailed Electron safety regulations!