Ulvac PRC-003A Instruction Manual page 5

To export this product abroad, you have to clear the examination in
accordance with the Foreign Exchange law, Foreign Trade law and relevant
decree, ordinance and order.
WARNING
Please feel free to contact our sales office or agency closest to you or our
Components Division.
This Instruction Manual shall absolutely need to be delivered to the last user
that uses the product.
WARNING
Any part of this Instruction Manual shall be in no manner reproduced for the
third party without our approval.
CAUTION
Installation and storage
(1) This product is packed with the wooden frame. Please ask the special
agency for dismantling it.
Advise the dismantling agent to wear leather gloves and use appropriate
tools such as pinch bar as they have a risk of cutting the hand by nail or
chip.
(2) Give the instruction them further to use the unloading machinery such as
crane to take out the product of the wooded frame, lift it up with its top
eyebolt and transfer it on lifting. Check the eyebolt whether it has no error
before use.
(3) Only the technically entitled person should be in charge of conducting the
WARNING
unloading operation and operating the unloading machinery.
(4) There is a risk that the Pump might drop or lay down when attempted
unreasonable operation or machinery setup was not sufficient. You are
strictly restricted to enter beneath the Pump.
(5) Advise the dismantling agent to wear leather gloves and use appropriate
tools such as pinch bar as they have a risk of cutting the hand by nail or
chip.
iv
YO99-0874-DI-002-18