Live Data - Autel MaxiSys MS908CV II Manual

➢ To erase codes
1.
2.
3.
4.
⚫ Read Codes — retrieves and displays the DTCs from the vehicle control system.
The Read Codes screen varies for each vehicle being tested.
⚫ ESC — tap it to return to the previous screen or exit the function.

4.6.3 Live Data

When this function is selected, the screen displays the data list for the selected module.
The parameters display in the order that they are transmitted by the ECU, so expect
variation among vehicles.
Gesture scrolling allows you to quickly move through the data list. Touch the screen and
drag your finger up or down to reposition the parameters being displayed if the data
occupies more than one screen. The figure below displays a typical Live data screen:
Tap Erase Codes in the Function Buttons.
A warning message displays to inform you of data loss when this
function is applied.
 Tap Yes to continue. A confirming screen displays when the
operation is successfully done.
 Tap No to exit.
Tap ESC on the confirming screen to exit Erase Codes screen.
Check the Read Codes function again to ensure the operation is
successful.
Figure 4-14 Live Data Screen
38