Getting Started; Power Up - Autel MaxiSys MS908CV II Manual

3

Getting Started

Make sure that the tablet has sufficient power or is connected to the external power
supply. (See Power Sources

3.1 Power Up

Long press (press and hold) the Power/Lock button on the top-right side of the tablet to
switch the unit on. Slide up from the bottom of the Lock screen to enter the MaxiSys Job
Menu screen.
Application Buttons
1.
Locator and Navigation Buttons
2.
Status Icons
3.
NOTE
It is recommended that you lock the screen when not in use to protect information in the
system and conserve the power.
on page 8.)
Figure 3-1 MaxiSys Job Menu
12