Autel MaxiSys MS908CV II Manual page 44

Available functions may vary by vehicle. The function menu may include:
ECU Information — displays detailed ECU information. Select to display
⚫
information screen.
Trouble Codes — contains Read Codes and Erase Codes. The former displays
⚫
detailed DTC information retrieved from the vehicle control module. The latter
facilitates you to erase DTCs and other data from the ECU.
Live Data — retrieves and displays live data and parameters from the vehicle's ECU.
⚫
Active Test — provides specific subsystem and component tests. This selection
⚫
may display as Actuators, Actuator Test, or Function Tests. Available tests vary by
vehicle.
Special Functions — provides component adaptation or variant coding functions
⚫
for custom configurations, and allows entry of adaptive values for certain
components after repairs. Depending on the test vehicle, this selection may
sometimes appear as Control Unit Adaptations, Variant Coding, Configuration, or
something similar.
➢ To perform Diagnostics function
Connect the MaxiSys tablet to the VCI device.
1.
Identify the vehicle through any of the vehicle identification methods supported
2.
by the MaxiSys tablet.
Tap Auto Scan or Control Unit to locate the needed test system.
3.
Select the function you need to perform from the Diagnostics Function screen.
4.
Figure 4-11 Diagnostics Function Screen
35