Autel MaxiSys MS908CV II Manual page 35

Tap OK. The vehicle will be identified and matched to the vehicle database, and
5.
the system will guide you to the Vehicle Diagnostics screen.
4.3.1.3 Scan VIN/License
Tap Scan VIN/License in the dropdown list (see
will be opened. On the right side of the screen, from top to bottom, three options are
available: Scan QR/Bar Code, Scan VIN, and Scan License.
NOTE
The method of Scan License is supported in some countries and areas. Please manually
input the license number if it is not available.
Select one of three options and position the tablet to align the VIN or license number
within the scanning window, the result displays in the Recognition result dialog box after
scanned. Tap OK to confirm the result, and then the vehicle information confirmation
screen will display on the tablet. If all the vehicle information is correct, tap the icon in the
middle of the screen to confirm the VIN of the vehicle being tested. Tap OK to continue.
Figure 4-5 Manual VIN Input
26
Figure 4-3 VID Screen). The camera