Table of Contents
Advertisement
Complete the following procedure to route the cables properly.
Procedure
Step 1.
Connect the GPU power cable to the corresponding connector on the power distribution board.
• For GPU adapter on PCIe riser 1:
• For GPU adapter on PCIe riser 2:
Step 2.
Secure the GPU power cable in cable clip
Step 3.
Proceed to connect the cable to the GPU adapter on PCIe riser assembly, and install the assembly.
See
"Install the PCIe riser assembly" on page
Note: Make sure to manage all the GPU power cables into the cable guide of the processor air
baffle when installing the PCIe assembly.
Figure 215. GPU power cables on processor air baffle
RAID flash power module (supercap) cable routing
Follow the instructions in this section to learn how to do cable routing for the RAID flash power module
(supercap).
240
ThinkEdge SE455 V3 User Guide
GPU 1 power connector
1
GPU 2 power connector
2
.
D
155.
Advertisement
Table of Contents
Troubleshooting
