Lenovo ThinkEdge SE455 V3 User Manual page 62

• Read "Installation Guidelines" on page 39
work safely.
• If applicable, remove the security bezel. See
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• If the server is installed in a rack, remove the server from the rack.
Note: Depending on the configuration, the EIA brackets might look slightly different from the illustration in
this section.
Procedure
Step 1. Remove the four or six screws that secure each of the EIA brackets to the chassis, and remove the
brackets from the chassis.
Figure 23. EIA bracket regular depth 1 to 6: six screws
54 ThinkEdge SE455 V3 User Guide
and "Safety inspection checklist" on page 40
"Remove the security bezel" on page
48.
to ensure that you
195.