Table of Contents
Advertisement
Performer Profile Mini MKII 5600K
Lens Locations
The different lenses used in the Performer are not interchangeable. When installing a new tube lens, refer
to the illustration below for proper placement.
Focusing the Beam
01) Loosen the beam focus controls located under the barrel (Fig. 04).
02) Slide the lens tube forwards or backwards to achieve the desired beam edge.
03) Once the fixture is focused, tighten the beam focus controls.
Gobo Slot
The gobo slot is located on the top of the barrel and is supposed to accommodate the gobo holder
(33086). When the slot is not in use, a small sheet metal cover, secured with a screw, prevents light
leakage (Fig. 05).
01) Use a screwdriver to loosen the screw on the gobo slot cover. Do not remove the screw.
02) Slide the cover completely forwards to expose the slot.
03) Insert the gobo holder.
04) Slide the slot cover back towards the shutters, until it meets the gobo holder's handle. Leave enough
space to move the handle.
05) Secure the slot cover by tightening the screw.
Ordercode: 33091
9
Fig. 03
Fig. 04
Fig. 05
Advertisement
Table of Contents
