Table of Contents
Advertisement
48
en | Connection
10.2.2
Connecting watertight, electrically grounded metal conduit to Bosch
Outdoor Midspans
1.
2.
3.
4.
2023-09-29 | V06 | F.01U.410.315
Unscrew and remove the fittings from the DATA & PWR OUT and DATA IN ports of the
Bosch Outdoor midspan.
Find electrically conductive liquid tight metal conduit with PG16 threads to screw into
the two holes, or find an appropriate liquid tight fitting to adapt a PG16 male thread to
the conduit of your choice such as ½ " NPT while maintaining its IP rating.
Add 4 wraps of PTFE tape to the threads to ensure IP66.
Connect the braided ground wire on the metal housing of the outdoor midspan to earth
ground of the system installation.
Installation Manual
AUTODOME 7100i│AUTODOME 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
