AUTODOME IP 4000 HD / AUTODOME Table of Contents | en IP 5000 HD / AUTODOME IP 5000 IR Table of contents Browser connection System requirements Establishing the connection 1.2.1 Password protection in camera Protected network System overview Live page...
Page 3
AUTODOME IP 4000 HD / AUTODOME en | Table of Contents IP 5000 HD / AUTODOME IP 5000 IR Recording Scheduler Recording Status Alarm Alarm Connections Audio Alarm Alarm E-Mail Alarm Task Editor Alarm Rules Interfaces Alarm Inputs Alarm Outputs Network 10.1...
If you cannot connect, the unit may have reached its maximum number of connections. Depending on the device and network configuration, each unit can have up to 50 web browser connections, or up to 100 connections via Bosch Video Client or Bosch Video Management System.
AUTODOME IP 4000 HD / AUTODOME en | System overview IP 5000 HD / AUTODOME IP 5000 IR System overview When a connection is established, the LIVE page is initially displayed. The application bar displays the following items: – LIVE, –...
3.1.1 Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. Note: Depending on the PC network security settings, the user may need to add the new IP address to the browser’s trusted sites list for the controls to operate.
AUTODOME IP 4000 HD / AUTODOME en | Configuration IP 5000 HD / AUTODOME IP 5000 IR Click Set and Reboot. The camera will reset (go through the homing sequence, which usually takes 30 seconds to complete), and then the LIVE page appears, with updated video and the new IP address.
Page 8
AUTODOME IP 4000 HD / AUTODOME Configuration | en IP 5000 HD / AUTODOME IP 5000 IR Notice! The audio signal is sent in a separate data stream parallel to the video data, and so increases the network load. The audio data is encoded according to G.711 or L16 and requires an additional bandwidth of approximately 80 Kbit/s for each connection.
AUTODOME IP 4000 HD / AUTODOME General | en IP 5000 HD / AUTODOME IP 5000 IR Enter the password for the appropriate authorization level here. Confirm password In each case, enter the new password a second time to eliminate typing mistakes.
AUTODOME IP 4000 HD / AUTODOME en | General IP 5000 HD / AUTODOME IP 5000 IR Select other values from the list fields below the table to change the entry. Changes are made immediately. If there are empty lines at the bottom of the table, for example after deletions, you can add new data by marking the row and selecting required values from the list fields.
AUTODOME IP 4000 HD / AUTODOME General | en IP 5000 HD / AUTODOME IP 5000 IR Alarm mode stamping Select On to display a text message overlay in the image in the event of an alarm. It can be displayed at a position of your choice that you can then specify using the Custom option.
Page 13
AUTODOME IP 4000 HD / AUTODOME en | General IP 5000 HD / AUTODOME IP 5000 IR H.264 elementary stream Select this checkbox to select or to enable the H.264 elementary stream. Registration timeout Enter the value in (milli?)seconds before the registration timeout occurs. The default value is 3600.
AUTODOME IP 4000 HD / AUTODOME Web Interface | en IP 5000 HD / AUTODOME IP 5000 IR Web Interface Appearance Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The image file can be stored on a local computer, in the local network or at an Internet address.
Page 15
AUTODOME IP 4000 HD / AUTODOME en | Web Interface IP 5000 HD / AUTODOME IP 5000 IR Allow snapshots Here you can specify whether the icon for saving individual images (snapshots) should be displayed below the live image. Individual images can only be saved if this icon is visible.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR Camera Installer Menu Base frame rate This option allows you to set the frame rate that the camera uses to transmit video. Select either 25 ips or 30 ips.
– Vibrant Note: When the camera is in an indoor room that often has smoke or has low-contrast and the camera monitors an area facing the outdoors (such as large windows), Bosch recommends to select mode Outdoor. Mode ID The name of the selected mode is displayed.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR Option in field Additional Additional fields for NOTES “White balance” Input field configuration Sodium vapor auto RGB- R-weight weighted G-weight white B-weight balance...
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD / AUTODOME IP 5000 IR Select the range within which the ALC will operate. A positive value is more useful for low- light conditions; a negative value is more useful for very bright conditions.
Select Off to disable the feature. Note: When the camera is in an indoor room that often has smoke or has low-contrast and the camera monitors an area facing the outdoors (such as large windows), Bosch recommends to select option Auto.
Page 21
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD / AUTODOME IP 5000 IR Profile name Default Profile name Description HD Image Optimized For an HD image, the video bit rate and frame quality are adjusted to ensure that the picture quality is the priority.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR Options are IP, IBP, and IBBP. Averaging period Select the appropriate averaging period as a means of stabilizing the long term bit rate.
Page 23
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD / AUTODOME IP 5000 IR Stream 1 (recording) Options are: - H.264 MP SD - H.264 MP 720p25/30 Fixed - H.264 MP 1080p25/30 Fixed; - H.264 MP 720p50/60 Fixed Note: In order to select the option “H.264 MP 720p50/60 Fixed”...
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR JPEG stream Select the resolution, frame rate, and image quality parameters for the M-JPEG stream. – Resolution: Select the appropriate resolution. – Max. frame rate: Select one of the following frame rates to be the maximum: 5, 10, 15, 20, 25, or 30 ips.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD / AUTODOME IP 5000 IR Select the number of the privacy mask. A colored rectangle appears in the unlabeled video preview window above the Set button. Use the mouse to define the area for each privacy mask.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR 6.12 PTZ Settings Auto pan speed Continuously pans the camera at a speed between right and left limit settings. Type a value between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
SW, W, NW) heading in which the camera is pointing. Notice! The compass feature is not compatible with Bosch’s Intelligent Tracking feature. If Intelligent Tracking is activated, the camera automatically disables the display of the compass heading. Once Intelligent Tracking is deactivated, the camera returns the compass heading to the display.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD / AUTODOME IP 5000 IR To delete a scene from the list, select the scene and click the button Delete scene To overwrite an existing scene: – Use the PTZ controls to navigate to the new scene.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD / AUTODOME IP 5000 IR IR far intensity limit Select the limit (percentage) of intensity for IR at far focus range. Values range from 0 to 100 (default).
AUTODOME IP 4000 HD / AUTODOME Recording | en IP 5000 HD / AUTODOME IP 5000 IR Recording Storage Management Device manager If you activate the Managed by VRM option in this screen, the VRM Video Recording Manager will manage all recording and you will not be able to configure any further settings here.
AUTODOME IP 4000 HD / AUTODOME en | Recording IP 5000 HD / AUTODOME IP 5000 IR Check the box in the Rec. 1 or Rec. 2 to specify which data stream should be recorded on the storage media selected. Rec. 1 stores Stream 1, Rec. 2 stores Stream 2. This means that you can record the standard data stream on a hard drive and record alarm images on the mobile CF card, for example.
Page 32
Notice! For more information, please see the Alarm Task Script Language document and the RCP+ documentation. For the latest version of these documents access your Bosch product catalog on the Internet. Bosch Security Systems Software Manual 2015.04 | .07 |...
AUTODOME IP 4000 HD / AUTODOME en | Recording IP 5000 HD / AUTODOME IP 5000 IR Export to account Select this parameter if you want all alarm recordings to be exported to an FTP server automatically. Make sure to have inserted all relevant data for FTP posting.
AUTODOME IP 4000 HD / AUTODOME Recording | en IP 5000 HD / AUTODOME IP 5000 IR Activating the Recording After completing configuration you must activate the recording scheduler and start the recording. Once recording is underway, the Recording Profiles and Recording Scheduler pages are deactivated and the configuration cannot be modified.
VIDOS or Bosch Video Management System, you can store a general password here. The camera can use this general password to connect to all remote stations protected with the same password.
Page 36
AUTODOME IP 4000 HD / AUTODOME Alarm | en IP 5000 HD / AUTODOME IP 5000 IR Caution! Please note that in some circumstances, a larger bandwidth must be available on the network for additional video images in the event of an alarm, in case Multicast operation is not possible.
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD / AUTODOME IP 5000 IR Audio Select On to activate audio alarms. VCA configuration Select one of the profiles here to activate it or edit it. You can rename the profile.
Select On if you want the device to generate audio alarms. Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Caution! Do not use any special characters, for example &, in the name.
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD / AUTODOME IP 5000 IR Signal Ranges You can exclude particular signal ranges in order to avoid false alarms. For this reason the total signal is divided into 13 tonal ranges (mel scale). Check or uncheck the boxes below the graphic to include or exclude individual ranges.
AUTODOME IP 4000 HD / AUTODOME Alarm | en IP 5000 HD / AUTODOME IP 5000 IR Note: The name must include at least two character groups separated by a blank (for example, Parking Garage) in order for the system to generate an email from that name, as in “From Parking Garage”.
Page 41
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD / AUTODOME IP 5000 IR – Time range: If you select this option, then two input fields appear to the right. In these fields, enter the time range for the activation of the alarm in hours and minutes. (The default values are 00:00 and 00:01.)
AUTODOME IP 4000 HD / AUTODOME Interfaces | en IP 5000 HD / AUTODOME IP 5000 IR Interfaces Alarm Inputs Alarm input Select N.O. if the alarm is to be triggered when the contact closes. Select N.C. if the alarm is to be triggered when the contact opens.
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...
Page 44
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD / AUTODOME IP 5000 IR TCP rate control Select On to control the rate of transmission control protocol. Select Off if you do not want to control the TCP rate.
The settings on this page are used to implement advanced settings for the network. Operation The operation mode determines how the camera communicates with Bosch Cloud-based Security and Services. For more information about these services and their availability, visit: http://cloud.boschsecurity.com –...
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD / AUTODOME IP 5000 IR To configure the unit, you must connect the camera directly to a computer using a network cable. This is because communication via the network is not enabled until the Identity and Password parameters have been set and successfully authenticated.
AUTODOME IP 4000 HD / AUTODOME en | Network IP 5000 HD / AUTODOME IP 5000 IR Quality of service The camera offers Quality of Service (QoS) configuration options to ensure fast network response to PTZ data and images. Quality of Service (QoS) is the set of techniques to manage network resources.
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD / AUTODOME IP 5000 IR Notice! Duplication of data places a heavy demand on the unit and can lead to impairment of the image quality under certain circumstances.
AUTODOME IP 4000 HD / AUTODOME en | Network IP 5000 HD / AUTODOME IP 5000 IR 10.8 IPv4 Filter Use this setting to configure a filter that allows or blocks network traffic that matches a specified address or protocol.
Thus, a camera can be serviced and updated remotely without requiring a technician to make changes to the device on site. The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area.
AUTODOME IP 4000 HD / AUTODOME en | Service IP 5000 HD / AUTODOME IP 5000 IR EAP-TLS client Select the client for Extensible Authentication Protocol-Transport Layer Security (EAP-TLS). Note: The only option may be “None.” EAP-TLS trusted Select the trusted certificate for Extensible Authentication Protocol-Transport Layer Security (EAP-TLS).
AUTODOME IP 4000 HD / AUTODOME Operation via the browser | en IP 5000 HD / AUTODOME IP 5000 IR Operation via the browser 12.1 Live page After the connection is established, the LIVE page is initially displayed. It shows the live video image on the right of the browser window.
AUTODOME IP 4000 HD / AUTODOME en | Operation via the browser IP 5000 HD / AUTODOME IP 5000 IR 12.1.4 AUX Control Show scene Click this button to display a preset scene. Set scene Click this button to set a preset scene.
When accessing the unit with a browser, the local storage, processor and network status icons are shown in the upper right of the window next to the Bosch logo. When a local storage card is available, the memory card icon changes color (green, orange or red) to indicate the local storage activity.
AUTODOME IP 4000 HD / AUTODOME en | Operation via the browser IP 5000 HD / AUTODOME IP 5000 IR 12.1.13 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might show artifacts due to decoding errors.
AUTODOME IP 4000 HD / AUTODOME Operation via the browser | en IP 5000 HD / AUTODOME IP 5000 IR Click the Dewarping arrow to see the options. Select E-PTZ or Off. To view a recording stream: Click the Recording arrow to see the options.
– Autofocus does not activate if the camera is moving between pre positions. – Bosch recommends that users turn off Autofocus when the camera is moving at very high speed (>60⁰/second). – Autofocus compensates for focus distortion from the camera bubble.
AUTODOME IP 4000 HD │ AUTODOME AUX Commands | en IP 5000 HD │ AUTODOME IP 5000 IR AUX Commands Function Description Notes On/Off AutoPan (Continuous) On/Off Run Custom Pre-Position Tour On/Off Run Pre-Position Tour On/Off AutoPivot Enable On/Off Backlight Compensation (BLC)