Pixel Format; Camera Direction Control; Pixel Readout Direction (Mirroring Mode); Resetting The Camera - Teledyne Piranha4 Quadlinear User Manual

Piranha4 RGB + NIR / Mono Camera User's Manual

Pixel Format

Use the Pixel Format feature, found in the Image Format Control set, to select the format of the pixel to
use during image acquisition.
Parameter
Pixel Format

Camera Direction Control

Found in the I / O Control > Direction Control set of features.
Parameter
Sensor Scan Direction
Scan Direction

Pixel Readout Direction (Mirroring Mode)

Set the tap readout from left to right or from right to left. This feature is especially useful if you want to
mount the camera "upside down."
Parameter
ReverseX

Resetting the Camera

The feature Camera Reset, part of the Transport Layer set, resets the camera. The camera resets with the
default settings, including a baud rate of 9600.
Parameter
Camera Reset
Teledyne DALSA
Image Format Control
RGB8, RGB10, RGB12
Direction Control
This command lets you select the Internal or external
direction control. Use this feature to accommodate object
direction change on a web and to mount the camera
"upside down."
Read the current direction.
Image Format Control
Off: All pixels are read out from left to right.
On: All pixels are read out from right to left.
Camera Information
Resets the camera and puts in the default settings, including a 9600 baud
rate.
Description
Description
Description
Description
53
03-032-20217-02