Step 1. Install And Configure The Frame Grabber And Software; Install Frame Grabber; Install Sapera Lt And Camexpert Gui - Teledyne Piranha4 Quadlinear User Manual

22 Piranha4 RGB + NIR / Mono Camera User's Manual
Step 1. Install and configure the frame grabber
and software

Install Frame Grabber

Install a Full configuration Camera Link frame grabber according to the manufacturer's description.
We recommend the Xcelera-CL PX8 frame grabber or equivalent, described in detail on the
teledynedalsa.com site here.

Install Sapera LT and CamExpert GUI

Communicate with the camera using a Camera Link-compliant interface. We recommend you use
CamExpert. CamExpert is the camera interfacing tool supported by the Sapera library and comes
bundled with SaperaLT. Using CamExpert is the simplest and quickest way to send commands to and
receive information from the camera.
Camera Link Environment
These cameras implement the Camera link specification, which defines the device capabilities.
The Camera link XML device description file is embedded within the camera firmware allowing Camera
link-compliant applications to recognize the cameras' capabilities immediately after connection.
03-032-20217-02 Teledyne DALSA