Camera Operation; Factory Settings; Check Camera And Sensor Information - Teledyne Piranha4 Quadlinear User Manual

42

4. Camera Operation

Factory Settings

The camera ships and powers up for the first time with the following factory settings:
•
Camera Link Medium, 8 bit pixels, 85 MHz
•
Internal trigger, line rate 10 kHz
•
Internal exposure control, exposure time 30.5 µs
•
Flat field disabled
•
User coefficients set to 1x
•
Offset 0, System Gain 1x
•
White balanced gains all set to 1x
•
Color correction, not applied
•
Corrected using an 80 mm lens and a magnification of 0.8

Check Camera and Sensor Information

Camera and sensor information can be retrieved via a controlling application—for example, the
CamExpert GUI shown in the following examples. Parameters such as camera model, firmware version,
sensor characteristics, etc. are read to uniquely identify the connected device.
The camera information parameters are grouped together as members of the Camera Information set.
03-032-20217-02
Piranha4 RGB + NIR / Mono Camera User's Manual
Teledyne DALSA