Weatherman Function; Information; Heating Circuit - SOLARFOCUS ecotopzero Manual

15 Weatherman function

manager-touch
The boiler control eco
weather forecast data on an ongoing basis. The
weather forecast feature (weatherman) is integrated
as standard. The control accesses live data from a
weather server and uses this to tell the boiler when to
heat – or when to remain inactive, because sunshine
is expected.
Prerequisite for using the weatherman function:
Registration of the boiler on the SOLARFOCUS web
server (www.mysolarfocus.com), or in the
mySOLARFOCUS app.
During initialisation, it may take up to 4 hours until the
current weather details are transmitted. You can see
whether the weather data are already up-to-date in
the qualified personnel menu of the
mySOLARFOCUS app:
Press the button to access the weatherman menu.
If no connection is made and therefore the weather
data are not updated, check the following points:
► Has your heating system been correctly
registered on the SOLARFOCUS web server?
► Is the connection status between the control and
the SOLARFOCUS web server online?
► Is the Send data parameter set to Yes?
Operation manual ecotop-zero, ecotop-light

15.1 Information

receives current

15.2 Heating circuit

The weatherman information menu visualises the cur-
rent weather forecast.
Weatherman function
Off: The weather forecast is shown in the display, but
does not influence the control at all.
On: Depending on the weather forecast (cloud cov-
erage) and the current time and season, the following
control systems can be influenced:
–
Weather influence heating circuit
–
Sun entering the room
–
Weather influence DHW
–
Weather influence buffer charging
The following applies for all menus: The level of influ-
ence can be set using the plus/minus buttons on the
bar, in 10% steps
– 0% means that a good weather forecast has no
influence.
– 100% means a maximum level of influence.
This menu is only visible when a heating circuit is
enabled in the control.
15 Weatherman function
37