Installing The App, Registering The User; Adding System; Using The Mysolarfocus App; Approving Additional Users - SOLARFOCUS ecotopzero Manual

13 SOLARFOCUS-connect
► Note the serial number and PIN
► Change the Send data parameter to Yes.
In the event of registration not being successful,
check the following:
► Connection from display to router...
► Entered IP addresses
► Network router (e.g. status...).
14.3 Installing the app, registering the
user
The mySOLARFOCUS app is available in the Apple
Store and Google Play Store.
► Download, install and start the app.
► Press the Register new user button.
► Enter the information required and press the
Register button.
Ä An email will be sent to the email address
you provided.
► Open the email and click on the Confirm account
link.
Ä You can now sign into the app (to sign in,
enter your email address and password).

14.4 Adding system

þ Requirement: You have successfully signed
into the app.
► Press the Add new system button.
► Enter the data for your heating system (serial
number and PIN).
i
The weather forecast data for the weatherman
function are sent to the control on the basis of
the Postcode and Location fields.
i
Other than adding systems by means of the
app, you can also use the website.
https://www.mysolarfocus.com
36
i
Important: In principle only one user may
access a system. If additional users wish to
access a system, then they must be approved
in advance. Approving additional users > 36

14.5 Using the mySOLARFOCUS app

In the boiler control, the app icon indicates that the
parameter has been changed on the basis of an entry
in the app; e.g.
– on the heating circuit screen: If short-term mode
has been activated in the app
– on the heating circuit screen, in room settings
– on the heating curve screen
Changes using the app:
– On the heating circuit screen, only by day switch
is available in the time switch heating circuit
mode, and not by block.
– In the heating hot water screen, the time switches
Monday - Sunday and By block are not available
for DHW tank mode.

14.6 Approving additional users

You can enable access to your control for additional
users, for example heating engineers.
Issuing an approval
► Select the Approval menu item.
► Enter the user's email address and select the
Invite button.
Ä The invited user will receive an email with an
approval code for the system. They can use
this to add the system to their app account.
Operation manual ecotop-zero, ecotop-light