Connecting Boiler Control To The Internet - SOLARFOCUS ecotopzero Manual

12 Connecting boiler control to
the internet
i
The customer is responsible for the install-
ation and configuration of SOLARFOCUS-
connect and the mySOLARFOCUS app.
Hardware
► The cable is to be connected from the touch dis-
play (Ethernet interface X2 on the rear of the dis-
play) to the router.
IP configuration screen
► Perform the necessary settings in the boiler con-
trol (IP address, Gateway address, etc.).
To access the IP-VNC icon, select it in the boiler
control
– Selection menu screen
– Customer menu screen
– Qualified personnel button
► Enter the data for your router.
Recommended process:
– Select DHCP ON.
The IP address is determined automatically.
– Select the DHCP OFF + Adopt button.
Operation manual ecotop-zero, ecotop-light
12 Connecting boiler control to the internet
i
The IP address must be unique in each
Ethernet network and is dependent on the
other network components (PC,
modem/router, etc.).
Recommendation: Set a fixed IP address
(=DHCP OFF), i.e. the boiler control has a
constant IP address.
Integration in the home network is required for the
use of all external controls. All apps cannot be setup
without this.
i
The apps are based on a secure VPN
connection.
33