Test The Program - ABB AC500-eCo V3 Manual

By default, a download generates following actions in the CPU:
● The project is stored in the RAM memory.
● The project is stored in the flash EEPROM, if boot application was created.

5.4.8 Test the program

5.4.8.1 Start the program execution
5.4.8.2 Test the function
2021/06/29
You are logged in the CPU.
An executable project is loaded to the CPU.
The CPU is in "stop" mode.
Select menu "Debug è Start [PLC_AC500_V3]".
Alternatively, select the "start" icon in the tool bar.
Alternatively, press [F5].
Operate the switch I1 and observe:
● The LEDs of the relevant onboard I/O inputs and outputs.
● The online status of inputs and outputs within the POU.
3ADR010635, 2, en_US
Getting Started
Example project > Test the program
45