ABB AC500-eCo V3 Manual page 158

Device specifications
Installation > Mechanical dimensions
Fig. 9: Installation of AC500-eCo V3 CPU/S500 modules in a switch-gear cabinet
1 Cable duct
2 Distance from cable duct ≥20 mm
3 Mounting plate, earthed
6.5.1.2 Mechanical dimensions AC500-eCo V3
158
NOTICE!
Horizontal mounting is highly recommended.
Vertical mounting is possible, however, derating consideration should be made
to avoid problems with poor air circulation and overheating.
By vertical mounting, always place an end-stop terminal block (e.g. type BADL,
P/N: 1SNA399903R0200) on the bottom and on the top of the modules to prop-
erly secure the modules.
By high vibration applications and horizontal mounting, we also recommend to
place end-stop terminals at the right and left side of the device to properly
secure the modules, e.g. type BADL, P/N: 1SNA399903R0200.
All mechanical dimensions are given in millimeters and inches. The value in
brackets is the inch-value.
3ADR010635, 2, en_US 2021/06/29