Table of Contents
Advertisement
Device specifications
System data AC500-eCo V3 > Approvals and certifications
Electromagnetic Compatibility
Immunity against transient interference vol-
tages (burst):
Immunity against the influence of line-con-
ducted interferences (CW conducted):
1
) CM = Common Mode, DM = Differential Mode
2
) When DC I/O inputs are used with AC voltage, external filters limiting high energy surges to 1
kV CM / 0.5 DM are required to meet requirements according IEC 61131-2.
6.4.6 Mechanical data
Parameter
Mounting
Degree of protection
Housing
Vibration resistance acc. to EN 61131-2
Shock test
Mounting of the modules:
DIN rail according to DIN EN 50022
Mounting with screws
Fastening torque
6.4.7 Approvals and certifications
Information on approvals and certificates can be found in the corresponding chapter of the
Main catalog, PLC Automation.
156
Supply voltage units (DC)
Digital inputs/outputs (24 VDC)
Digital inputs/outputs (120 VAC...240 VAC)
Ethernet
Test voltage
High energy surges
Power supply DC
DC I/O supply
Buses, shielded
AC I/O unshielded
2
)
I/O analog, I/O DC unshielded
Radiation (radio disturbance)
3ADR010635, 2, en_US
According to IEC 61000-4-4, zone B, crite-
rion B
2 kV
1 kV
Relay 2 kV
1 kV
According to IEC 61000-4-6, zone B, crite-
rion A
20 V pass A
According to IEC 61000-4-5, zone B, crite-
rion B
1 kV CM / 0.5 kV DM
1 kV CM / 0.5 kV DM
ETH
1 kV DM
1
2
1
)
1 kV CM
According to IEC 55011, group 1, class A
Value
Horizontal
IP 20 (if all terminal screws are tightened)
Classification V0 according to UL 94
all three axes (DIN rail mounting)
5 Hz...8.4 Hz, continuous 3.5 mm
8.4 Hz...150 Hz, continuous 1 g
All three axes
15 g, 11 ms, half-sinusoidal
35 mm, depth 7.5 mm or 15 mm
Screws with a diameter of 4 mm
1.2 Nm
1
)
1
)
)
)
2021/06/29
Advertisement
Table of Contents
