Option Board For Specific Function - ABB AC500-eCo V3 Manual

Simple motion
Option board for specific function > Option board for digital I/O extension
Part no.
1SAP 187 000 R0001
1SAP 187 000 R0002
1SAP 187 000 R0003

8.6 Option board for specific function

Part no.
1SAP 187 200 R0001
1SAP 187 200 R0002
192
Description
TA5101-4DI: AC500, digital input module option board, 4DI 24 VDC,
spring/cable front terminal 3.50 mm pitch
TA5105-4DOT: AC500, digital output module option board, 4DO-T
24 VDC / 0.5 A, spring/cable front terminal 3.50 mm pitch
TA5110-2DI2DOT: AC500, digital in/output module option board, 2DI
24 VDC, 2DO-T 24 VDC / 0.5 A, spring/cable front terminal 3.50 mm
pitch
The TA5130-KNXPB can only be used on AC500-eCo V3 processor modules
Pro PM5072-T-ETH(W).
The TA5131-RTC can only be used on AC500-eCo V3 processor modules
Basic PM5012-x-ETH.
These two option boards can only be used once on one slot at a time!
Description
TA5130-KNXPB: AC500, KNX address switch option board, 1 push
button
TA5131-RTC:AC500, real-time clock without battery, option board
for AC500-eCo V3 Basic CPU
3ADR010635, 2, en_US 2021/06/29