Table of Contents
Advertisement
8.3.8 Use the onboard I/Os as output PWM (pulse-width modulation)
8.3.8.1
Parameter configuration
The user can configure the following output channels as PWM (pulse-width modulation).
●
"PWM 0": Output channel 0
●
"PWM 1": Output channel 1
●
"PWM 2": Output channel 2
●
"PWM 3": Output channel 3
●
"PWM 4": Output channel 4
●
"PWM 5": Output channel 5
●
"PWM 6": Output channel 6
●
"PWM 7": Output channel 7
8.3.8.2
Function block
The complete cycle of the "PWM" is based on the "OnTime" and "OffTime".
2021/06/29
System technology > Use the onboard I/Os as output PWM (pulse-width modulation)
See also the following chapter:
3ADR010635, 2, en_US
Simple motion
187
Advertisement
Table of Contents
