Table of Contents
Advertisement
Hoist Placement
Motor End hoist beam clamps are secured to the hoist backbone and cannot be adjusted. You must
align the Motor End of the hoist with the corresponding edge of the beam flange. This can be
accomplished by using a laser level to distinguish between the leading edge of the I-beam and the
Motor End beam clamp.
WARNING:
Directly attach lift lines or chains to the hoist lifting clip.
Installation
The hoist weighs approximately 295 kg (650 lbs) out of the crate. Take
precautions when lifting, making sure that the area is roped off and
personnel are away from the lifting area.
15
Advertisement
Table of Contents
