Technical Description; Vortek Nxt Specifications; Incoming Goods, Transport And Storage - ETC Vortek NXT Installation And Operation Manual

Technical Description

Vortek NXT Specifications

The Vortek NXT hoist is designed to work with ETC hoists, controlled by Foundation, QuickTouch
Preset, QuickTouch, or QuickTouch+ controls.
A Vortek NXT hoist is a fixed- or variable-speed electric wire rope winch, designed for use in the
entertainment and event industry.

Incoming Goods, Transport and Storage

Unloading Vortek NXT Hoists
Each Vortek NXT hoist crate has a label that identifies hoist type and position and whether the crate
contains the project packet, project drawings, this manual, the Rigging System Commissioning Signoff
and Rigging System Training Signoff forms.
Each crated Vortek hoist weighs approximately 500 kg (1100 lbs.).
There are only two places where the Vortek crates can be lifted with a forklift, the side and the Motor
End.
WARNING:
The first lifting point is from the Motor End
A forklift that has fork tines that are at least 104 cm (41") long, a maximum of 22 cm (8-1/2") wide
and 5 cm (2") thick is required to lift from the Motor End.
Technical Description
Never lift the crate from the Tail End position. If lifting the crate by an end
position, only lift it from the Motor End (heaviest) position.
7